Abstract:- A cotton gin is a machine that quickly and easily separates cotton fibers from their seeds, allowing for much greater productivity than manual cotton separation. The fibers are processed into clothing or other cotton goods, and any undamaged seeds may be used to grow more cotton or to produce cottonseed oil and meal. The cotton gin is a machine used to separate cotton fibers from the seed. The double roller ginning machine consists of various parts such as beater shaft, leather roller, moving knife, fixed knife, feeder, etc. During the ginning operation the shaft fails at certain location. The actual failure position of shaft shown in fig no A was studied and the failure analysis using theories of failure was used to identify and validate the place or point of failure.
Keywords: Ginning machine, beater shaft, theories of failure, SFD, BMD, failure analysis
I. Introduction
Ginning, in its strictest sense, refers to the process of separating cotton fibers from the seeds. The cotton gin has as its principal function the conversion of a field crop into a salable commodity. Thus, it is the bridge between cotton production and cotton manufacturing. Ginning is the first and most important mechanical process by which seed cotton is separated into lint (fiber) and seed and machine used for this separation is called as gin. It consists of two spirally grooved leather roller pressed against a fixed knife, are made to rotate at about 90-120 rpm. Two moving blades combined with seed grids constitutes a central assembly known as beater which oscillates by means of a crank or eccentric shaft, close to the fixed knife. When the seed cotton is fed to the machine in action, fibers adhere to the rough surface of the roller are carried in between the fixed knife and roller in such a way that the fibers are partially gripped between them. The oscillating knife beats the seed and separates the fibers. This process is repeated for number of times and due to push-pull-hit action the fibers are separated from the seed, carried forward on the roller and dropped out of machine. The ginned seeds drop down through the grid which is oscillating along with beater.
Fig. 1: Double Roller Gin machine
The beater assembly is the innermost and major part of the double roller gin and is sandwiched symmetrically between the stationary knives as shown in fig. It is composite unit consisting of moving knives and seed grids situated on the either side of the beater shaft. It has anchor shaped cross section and its axle is situated 100cm above ground and 15cm from each roller. Beater trough with perforations having concave edge with radius of 565cm and angle of 144 degree between two arms is provided to stop unginned cotton to fall down into seed chute.
http://ijirst.org/Article.php?manuscript=IJIRSTV2I3052
ijirst.org
This paper is published in our journal for more information go on above link.
