International Journal for Innovative Research in Science and Technology (IJIRST) is a one of the popular international multidisciplinary, open access, peer-reviewed, fully refereed journal. It is an international journal that aims to contribute to the constant innovative research and training, so as to promote research in the field of science and technology.
Saturday, March 26, 2016
Wednesday, February 24, 2016
Innovations in Micro-electronics, Signal Processing and Communication Technologies "National Conference(V-IMPACT-2016)" at VIVEKANANDA INSTITUTE OF TECHNOLOGY,Jaipur,Rajasthan,India
"National Conference(V-IMPACT-2016)"
on
Innovations in Micro-electronics, Signal Processing and Communication Technologies
In association with
IJIRST – International Journal for Innovative Research in Science and Technology
VIT Campus is organizing a conference on 'Innovations in Micro-Electronics, Signal Processing and Communication Technologies'. This conference is fifth in succession to conferences held in years 2012, 2013, 2014 and 2015. The aim of the conference is to review the recent advancement in understanding the science and technology, facilitate exchange of new ideas and explore emerging directions both in basic sciences and technological applications of Electronics, Signal Processing Communication. Recently, scientific activities are on surge on the MEMS, VLSI, DSP and Communication. So the increase in the research activities and the consequent enthusiasm is on rise day by day.
The new fields such as CAD, VLSI and MATLAB are at the horizon highlighting many important issues involved in the preparation and applications of these useful Systems & Fields. These topics which constitute the frontiers of devices and technology are expected to lead to the development of new systems and new technologies.
The Conference is intended to bring theorists, experimentalists and experts on a common platform and foster inter disciplinary research. The thrust of the conference will be to facilitate emergence of collaborations between the participants. The informal atmosphere that will prevail is expected to facilitate interactions between young researchers and experts which will be particularly useful for graduate/ research students. We invite you all to participate, deliver talks, present your work and make this event a great success.
The new fields such as CAD, VLSI and MATLAB are at the horizon highlighting many important issues involved in the preparation and applications of these useful Systems & Fields. These topics which constitute the frontiers of devices and technology are expected to lead to the development of new systems and new technologies.
The Conference is intended to bring theorists, experimentalists and experts on a common platform and foster inter disciplinary research. The thrust of the conference will be to facilitate emergence of collaborations between the participants. The informal atmosphere that will prevail is expected to facilitate interactions between young researchers and experts which will be particularly useful for graduate/ research students. We invite you all to participate, deliver talks, present your work and make this event a great success.
VIVEKANANDA INSTITUTE OF TECHNOLOGY
Sisyawas, NRI Road, Jagatpura, Jaipur-303012
Website : www.vitej.ac.in
Publication Partner:
Tuesday, January 12, 2016
#IJIRST Journal: Dynamic Clustering in Wireless Sensor Networks Based on the Data Traffic Flow and the Node Residual Battery Life Computation
Department of Computer Science and Engineering
Suresh Gyan Vihar University, Jagatpura
Abstract:- Wireless Sensor
Networks forms the core of the infrastructural facilities and amenities that
constitutes a major part of modern living. Wireless Sensor Networks founds
tremendous applications in domains such as theft alarms, wildlife monitoring,
radiation/pressure/light/heat sensor networks and the list is endless. It
constitutes the core part of the modern Internet of Things (IoT) that will
revolutionize the modern living. The Iot specifies a scenario in which the
devices can communicate with each other using the internet over a flexible
framework and can be programmed to perform specific actions based on the
programming customization made by the users. For example, a refrigerator is
runs out of milk or bread can email the requirement to the dairy that can
entertain the mail and ship a delivery of the same to the location of the
refrigerator. As sensor nodes are battery powered, there is a critical aspect
to same battery power. This is possible only by avoiding the in-network
communication as much as possible. A fraction of communication overhead can be
reduced through clustering. In this paper, an approach for dynamic clustering
is proposed based on the varying traffic loads to various PAN coordinators so
as to maximize the battery life and therefore the network lifetime.
Keywords:- Wireless sensor network, Clustering
Protocols, Battery Life etc.
I. Clustering in Wireless Sensor Networks
Clustering forms, the backbone towards the
persistence of sensor nodes towards sensing data in such a way that a single
lithium ion battery can work even for one and a half year continuously. This is
because of the reduction in in-network communication to the central node
through the creation of clusters in such a way that all the node in the cluster
transmit the data to the cluster head and the cluster head is responsible to
transmit the data to the central node. The senario is expressed in the
following figures.
Fig. 1: Wireless Sensor Network without clustering
Fig. 2: Wireless Sensor Network with clustering and
Data Aggregation
The individual collections shown in figure 1.2 are known as clusters
and the nodes that belongs to a particular cluster sends the data only to the
cluster head. Thus, reducing the data transmission over long distance from the
individual nodes to the central computer. In the clustered approach, the nodes
transmit the data to the cluster head over a relatively very short distance,
thus, conserving the battery life and enhancing the network lifetime.
II. Dynamic Clustering over the WirelessSensor Network
Consider
a network of N nodes and a static number set initially k as the total number of
cluster over the network. Thus, on an average, there are N/k in each cluster.
Also, consider a rectangular plane of dimension aXa over which the sensor nodes
are (approximately evenly) speeded.
As state previously, there are k clusters each having (N/k)-1 nodes as
ordinary sensing nodes and a Cluster head that hold the responsibility of
aggregating data from each of the (N/k)-1 nodes. Also assume that each packet
senses the medium and sends the data packet to the cluster head in specified
TDMA frame.
Considering the first order radio energy dissipation model, let the
energy consumption per bit in the transmission circuitry be Et and
the energy consumption per bit in the processing circuitry be Ep.
Let there be B bits in a TDMA packet. Considering the initial energy level in
the battery be E, one can approximate the residual battery life after N rounds.
Let Me be the number of rounds after which the leader election takes
place and a message is broadcasted to all the other nodes in the cluster
regarding the node which is elected as the leader so that all the nodes may
transmit the data to the specific node. The specified node then aggregates the
data from all the nodes in its cluster and transmit the data to the central
computer.
It is important to
note that the leader election process is an overhead and is incurred only to
manage the network traffic. Rapidly electing new heads and consequently
broadcasting the message to all other nodes in the network induce an overhead
which is to be avoided. On the other hand, it is also important to note that
the node which is elected as the cluster head depletes its energy very
frequently as it has to perform all the data aggregation processing all be
itself for all the nodes in the network. Thus, frequent leader election leads
to an evenly consumption of battery power in all the nodes of the cluster. If
no election of leader takes place, then the node which handles the task of
leader will soon run out of the battery.
In addition to the depltion of the battery in the normal rounds during
the data gathering, the leader will deplete the energy
E = Ebroad*n*[(N/k)-1]
in view of broadcasting the message, where n
is the number of bits in the broadcasted message, and all the nodes depletes an
amount of energy equals to
E = n*Ep
in view of the reception of the message
regarding the leader of the cluster.
Let p be the average number of packets that
are transmitted by any node and let the length of each packet be l. For
implementation, the case study of Zigbee radio sensors is considered in which
the underlying operating system is tiny OS having packet size of l=114 bytes.
The important points to analyze in the scenario is:
For More Information Click Here
Saturday, December 12, 2015
Retrofitting of Reinforced Concrete Beam with Externally Bonded CFRP
Author Name:- J. Gopi Krishna
Abstract:- In our country many of the existing reinforced concrete structures are in need of repair or reconstruction, rehabilitation, because of deterioration due to various factors like corrosion, lack of detailing, failure of bonding between beam-column joints, increase in service loads, improper design and unexpected external lateral loads such as wind or seismic forces acting on a structure, environment and accident events etc., leading to cracking, spalling, loss of strength, deflection, etc. Strengthening of existing reinforced concrete structures is necessary to obtain an expected life span and achieve specific requirements. The need for efficient rehabilitation and strengthening techniques of existing concrete structures has resulted in research and development of composite strengthening systems. Recent experimental and analytical research have demonstrated that the use of composite materials for retrofitting existing structural components is more cost-effective and requires less effort and time than the traditional means. Fiber Reinforced Polymer (FRP) composite has been accepted in the construction industry as a capable substitute for repairing and strengthening of RCC structures. The superior properties of (FRP) polymer composite materials like high corrosion resistance, high strength, high stiffness, excellent fatigue performance and good resistance to chemical attack etc., has motivated the researchers and practicing engineers to use the polymer composites in the field of rehabilitation of structures. During past two decades, much research has been carried out on shear and flexural strengthening of reinforced concrete beams using different types of fiber reinforced polymers and adhesives. A detailed Literature review based on the previous experimental and analytical research on retrofitting of reinforced concrete beams is presented. Proposed method of strengthening the RC beam is decided based on the previous experimental and analytical research. Behaviors of retrofitted reinforced concrete beams with externally bonded CFRP with various types of resins (Epoxy, Orthophthalic Resin (GP), ISO resin) after initial load (60 % control beam) is investigated. Static load responses of all the beams under two point load method had evaluated in terms of flexural strength, crack observation, compositeness between CFRP fabric and concrete, and the associated failure modes.
Keywords: Fiber Reinforced Polymer (FRP), CFRP fabric, reinforced concrete structures
I. Introduction
Concrete is the most widely used man-made construction material in world. It is obtained by mixing cementing materials, water and aggregates, and sometimes admixtures is required proportions. Concrete has high compressive strength, low cost and abundant raw material, but its tensile strength is very low. Reinforced concrete, which is concrete with steel bars embedded in it. Concrete is an affordable material, which is extensively used throughout in the infrastructure of nation’s construction, industry, transportation, defense, utility, and residential sector. The flexibility and mould ability of this material, its high compressive strength, and the discovery of the reinforcing and prestressing techniques which helped to make up for its low tensile strength have contributed largely to its widespread use.
Reinforced concrete structures often have to face modification and improvement of their performance during their service life. In such circumstances there are two possible solutions. The first is replacement and the other is retrofitting. Full structure replacement might have determinate disadvantages such as high costs for material and labour, a stronger environmental impact and inconvenience due to interruption of the function of the structure e.g. traffic problems. So if possible, it is often better to repair or upgrade the structure by retrofitting. Retrofitting methods is shown in figure 2.1.1. In recent years repair and retrofit of existing structures such as buildings, bridges, etc., have been quite prevalent among the most important challenges in Civil Engineering.
For more Information Click Here
Wednesday, December 9, 2015
Paper Title:- Development of ANN and AFIS Models for Age Predictionof in-Service Transformer Oil Samples
Author Name:- Mohammad Aslam Ansari
Department of Electrical Engineering
Abstract:- Power transformer is one of the most important and expensive equipment in electrical network. The transformer oil is a very important component of power transformers. It has twin functions of cooling as well as insulation. The oil properties like viscosity, specific gravity, flash point, oxidation stability, total acid number, breakdown voltage, dissipation factor, volume resistivity and dielectric constant suffer a change with respect to time. Hence it is necessary that the oil condition be monitored regularly to predict, if possible, the remaining lifetime of the transformer oil, from time to time. Six properties such as moisture content, resistivity, tan delta, interfacial tension and flash point have been considered. The data for the six properties with respect to age, in days, has been taken from literature, whereby samples of ten working power transformers of 16 to 20 MVA installed at different substations in Punjab, India have been considered. This paper aims at developing ANN and ANFIS models for predicting the age of in-service transformer oil samples. Both the the models use the six properties as inputs and age as target. ANN (Artificial Neural Network) model uses a multi-layer feedforward network employing back propagation algorithm, and ANFIS (Adaptive Neuro Fuzzy Inference System) model is based on Sugeno model. The two models have been simulated for estimating the age of unknown transformer oil samples taken from generator transformers of Anpara Thermal Power Project in state of U.P. India. A comparative analysis of the two models has been made whereby ANFIS model has been found to yield better results than ANN model.
I. Introduction
Power transformer is one of the most important constituent of electrical power system. The transformer oil, a very important ingredient of power transformers, acts as a heat transfer fluid and also serves the purpose of electrical insulation. Its insulating property is subjected to the degradation because of the ageing, high temperature, electrical stress and other chemical reactions. Hence it is necessary that the oil condition be monitored regularly. This will help to predict, if possible, the in-service period or remaining lifetime of the transformer oil, from time to time.
There are several characteristics which can be measured to assess the present condition of the oil. The main oil characteristics are broadly classified as physical, chemical and electrical characteristics; some of these are viscosity, specific gravity, flash point, oxidation stability, total acid number, breakdown voltage, dissipation factor, volume resistivity and dielectric constant. There exists a co-relation among some of the oil properties and suffer a change in their values with respect to time [2]. This variation of oil properties with respect to time has been utilised to develop the two models as said earlier
The training data for the proposed work have been obtained from literature, whereby ten working transforms of 16 to 20 MVA, 66/11 KV installed at different substations in the state of Punjab, India have been considered. The six properties of transformer oil such as breakdown voltage (BDV), moisture, resistivity, tan delta, interfacial tension and flash point have been considered as inputs and age as target. Test data have been taken from generator transformers of 250 MVA, 15.75kV/400kV from Anpara Thermal Power Project in state of U. P., India.
II. “Ann” and “Anfis” methods
It is known that classical models need linear data for their processing, therefore models like ANN and ANFIS that are based on soft computing techniques, play an important role for solving these kinds of non-linear problems.
Neural networks exhibit characteristics such as mapping capabilities or pattern association, generalization, robustness, fault tolerance, parallel and high speed processing. Neural networks can be trained with known examples of a problem to acquire knowledge about it. Once trained successfully, the network can be put to effective use in solving unknown or untrained instances of the problem. ANN model which uses multilayer feed forward network is based on back propagation (BP) learning algorithm of neural network. Backpropagation gives very good answers when presented with inputs never seen before. This property of generalization makes it possible to train a network on giving set of input-target pairs and get good output.
ANFIS stands for Adaptive Neural Fuzzy Inference System. Using a given
input/output data set, the toolbox function ANFIS constructs a fuzzy inference
system (FIS) whose membership function parameters are tuned (adjusted) using
either a backpropagation algorithm alone, or in combination with a least
squares type of method. This allows the fuzzy systems to learn from the data
they are modelling. These techniques provide a method for the fuzzy modeling
procedure to learn information about a data set, in order to compute the
membership function parameters that best allow the associated fuzzy inference
system to track the given input/output data. This learning method works
similarly to that of neural networks.
III.
Development of ann model
The proposed ANN
model uses “Levenburg-Marquardt
(trainlm) algorithm which is independent of learning rate, hence by simply changing
the number of neurons in hidden layer, training and testing error could be
reduced. A total of 700 data sets obtained from
literature [2] were arranged in tabular form and used for training the neural
network. The model uses a simple
two layer network, one hidden layer and one output layer. Input layer comprises
of six neurons, one for the each input, while the output layer has a single
neuron for a single output, the age of oil sample.
It has been found that network architecture
that uses 20 neurons in hidden layer gave the best performance with a
regression of 0.999 and mean square error (MSE) of 83.0 ( data is non
–normalized, so error looks large ) . The training continued for 184 iterations
with training functions logsig in hidden layer and purelin in output layer
respectively.
For More Information Click Here
Monday, December 7, 2015
A Time Domain Reference-Algorithm for Shunt Active Power Filters
Abstract:- The aim of this paper is to identify an optimum control strategy of three-phase shunt active filters to minimize the total harmonic distortion factor of the supply current Power Quality (PQ) is an important measure of an electrical power system. The term PQ means to maintain purely sinusoidal current wave form in phase with a purely sinusoidal voltage wave form. The power generated at the generating station is purely sinusoidal in nature. The deteriorating quality of electric power is mainly because of current and voltage harmonics due to wide spread application of static power electronics converters, zero and negative sequence components originated by the use of single phase and unbalanced loads, reactive power, voltage sag, voltage swell, flicker, voltage interruption etc. The simulation and the experimental results of the shunt active filter, along with the estimated value of reduction in rating, show that the shunt filtering system is quite effective in compensating for the harmonics and reactive power, in addition to being cost-effective.
Keywords: Shunt voltage inverter APF, Time domain, instantaneous active power, carrier based PWM, Control strategy etc.
I. Introduction
The wide use of power devices (based on semi-conductor switches) in power electronic appliances (diode and thyristor rectifiers, electronic starters, UPS and HVDC systems, arc furnaces, etc…) induces the appearance of the dangerous phenomenon of harmonic currents flow in the electrical feeder networks, producing distortions in the current/voltage waveforms. As a result, harmful consequences occur: equipment overheating, malfunction of solid-state material, interferences with telecommunication systems, etc... Damping harmonics devices must be investigated when the distortion rate exceeds the thresholds fixed by the ICE 61000 and IEEE 519 standards. For a long time, tuned LC and high pass shunt passive filters were adopted as a viable harmonics cancellation solution.
II. Shunt active filtering algorithms
The control algorithm used to generate the reference compensation signals for the active power filter determines its effectiveness. The control scheme derives the compensation signals using voltage and/or current signals sensed from the system. The control algorithm may be based on frequency domain techniques or time domain techniques. In frequency domain, the compensation signals are computed using Fourier analysis of the input voltage/current signals. In time domain, the instantaneous values of the compensation voltages/currents are derived from the sensed values of input signals. There are a large number of control algorithms in time domain such as the instantaneous PQ algorithm, synchronous detection algorithm, synchronous reference frame algorithm and DC bus voltage algorithm. The instantaneous PQ algorithm by Akagi is based on Park’s transformation of input voltage and current signals from which instantaneous active and reactive powers are calculated to arrive at the compensation signals. This scheme is most widely used because of its fast dynamic response but gives inaccurate results under distorted and asymmetrical source conditions.
For More Information Click Here
Saturday, November 28, 2015
Performance of WRF (ARW) over River Basins in Odisha, India During Flood Season 2014
Author Name:- Sumant Kr. Diwakar
India Meteorological Department, New Delhi, India
Abstract:- Operational Weather Research & Forecasting – Advanced Research WRF in short WRF (ARW) 9 km x 9 km Model (IMD) based rainfall forecast of India Meteorological Department (IMD) is utilized to compute rainfall forecast over River basins in Odisha during Flood season 2014. The performance of the WRF Model at the sub-basin level is studied in detail. It is observed that the IMD’s WRF (ARW) day1, day2, day3 correct forecast range lies in between 31-47 %, 37-43%, and 28-47% respectively during the flood season 2014.
Keywords: GIS; WRF (ARW); IMD; Flood 2014; Odisha
I. Introduction
Forecast during the monsoon season river sub-basin wise in India is difficult task for meteorologist to give rainfall forecast where the country have large spatial and temporal variations. India Meteorological Department (IMD) through its Flood Meteorological Offices (FMO) is issuing Quantitative Precipitation Forecast (QPF) sub-basin wise for all Flood prone river basins in India (IMD, 1994). There are 10 FMOs all over India spread in the flood prone river basins and FMO Bhubaneswar, Odisha is one of them. The Categories in which QPF are issued are as follows
Rainfall (in mm)
|
0
|
1-10
|
11-25
|
26-50
|
51-100
|
>100
|
Odisha is an Indian state on the subcontinent’s east coast, by the Bay of Bengal. It is located between the parallels of 17.49’ N and 22.34’ N Latitudes and meridians of 81.27’ E and 87.29’ E Longitudes. It is surrounded by the Indian states of West Bengal to the north-east and in the east, Jharkhand to the north, Chhattisgarh to the west and north-west and Andhra Pradesh to the south. Bhubaneswar is the capital of Odisha.
Odisha is the 9th largest state by area in India and the 11th largest by population. Odisha has a coastline about 480 km long. The narrow, level coastal strip including the Mahanadi river delta supports the bulk of the population. On the basis of homogeneity, continuity and physiographical characteristics, Odisha has been divided into five major morphological regions. The Odisha Coastal Plain in the east, the Middle Mountainous and Highlands Region, the Central Plateaus, the western rolling uplands and the major flood plains.
A. River System
The river system of Odisha comprises the Mahanadi, Brahmani, Baitarani, Subarnarekha, Vamasadhara, Burhabalanga, Rushikulya, Nagavali, Indravati, Kolab, Bahuda, Jambhira and other tributaries and distributaries.
For More Information Click Here
Subscribe to:
Posts (Atom)